Bluetooth DUN with BlackBerry 9700, T-Mobile and Ubuntu 9.10
I just bought a new laptop (Thinkpad T500) but the only WWAN cards available built in were for either Verizon or AT&T, which is suboptimal as I use T-Mobile which uses the AWS UMTS bands (1,4,8) instead of the bands used in the US by AT&T (1,2,5,6). Since my Blackberry 9700 supports T-Mobile 3G as well as their implementation of UMA I decided to try to get the Bluetooth DUN working.
Bluetooth DUN, T-Mobile UMA
After much searching, this post got me the closest though recent changes either with the new OS 5.0 on the 9700 or T-Mobile’s network have made some tweaks necessary.
http://pegelinux.wordpress.com/2008/06/11/blackberry-curve-8310-as-bluetooth-modem-on-ubuntu-hardy/
I will not go into all the step-by-step details as it is covered above and elsewhere, but first you need to get your computer to bind to the Blackberry DUN service via Bluetooth, I chose to edit /etc/bluetooth/rfcomm.conf to make this happen automatically, but BlueManager also seems to be able to do the same thing with a much more friendly UI if you want to try that route, anyway you cut it, you need to have the DUN service show up as a /dev/rfcomm# device. Once you have completed that you will want to setup pppd(8) much like the above article suggests.
This resulted in a session that looked like the following for me:
mernisse@mernisse-laptop:/etc/chatscripts$ pppd call gprs
Press CTRL-C to close the connection at any stage!
defining PDP context...
OK
OK
waiting for connect...
CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.
Script /etc/chatscripts/gprs-connect-chat finished (pid 14835), status = 0x0
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 < --> /dev/rfcomm0
sent LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x5db98b32>
rcvd LCP ConfReq id=0x0 <asyncmap 0x0> <auth pap>
sent LCP ConfAck id=0x0 <asyncmap 0x0> <auth pap>
rcvd LCP ConfRej id=0x1 <magic 0x5db98b32>
sent LCP ConfReq id=0x2 <asyncmap 0x0>
rcvd LCP ConfAck id=0x2 </asyncmap><asyncmap 0x0>
sent PAP AuthReq id=0x1 user="mernisse-laptop" password=""
rcvd PAP AuthAck id=0x0
PAP authentication succeeded
sent CCP ConfReq id=0x1 <deflate 15> </deflate><deflate (old#) 15>
sent IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
rcvd LCP ProtRej id=0x1 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd IPCP ConfReq id=0x2 <addr 169.254.1.1>
sent IPCP ConfAck id=0x2 </addr><addr 169.254.1.1>
rcvd IPCP ConfNak id=0x1 <ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
sent IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
rcvd IPCP ConfNak id=0x2 </ms><ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
sent IPCP ConfReq id=0x3 <addr 0.0.0.0> <ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
rcvd IPCP ConfNak id=0x3 </ms><ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
sent IPCP ConfReq id=0x4 <addr 0.0.0.0> <ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
rcvd IPCP ConfNak id=0x4 </ms><ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
sent IPCP ConfReq id=0x5 <addr 0.0.0.0> <ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
rcvd IPCP ConfNak id=0x5 </ms><ms -dns1 0.0.0.0> </ms><ms -dns2 0.0.0.0>
sent IPCP ConfReq id=0x6 <addr 0.0.0.0>
rcvd IPCP ConfNak id=0x6
sent IPCP ConfReq id=0x7 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x7
sent IPCP ConfReq id=0x8 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x8
sent IPCP ConfReq id=0x9 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x9
sent IPCP ConfReq id=0xa </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0xa </addr><addr 14.36.76.18>
sent IPCP ConfReq id=0xb
rcvd IPCP ConfAck id=0xb
Could not determine local IP address
Connect time 0.1 minutes.
Sent 186 bytes, received 120 bytes.
sent IPCP TermReq id=0xc "Could not determine local IP address"
rcvd IPCP TermAck id=0xc
sent LCP TermReq id=0x3 "No network protocols running"
rcvd LCP TermAck id=0x3
Connection terminated.
Sending break to the modem
PDP context detached
Script /etc/chatscripts/gprs-disconnect-chat finished (pid 14843), status = 0x0
Serial link disconnected.
As you can see, a number of Naks have been received for things that do not work and the connection fails. Tracking each error down step by step I removed noauth from the peers file and replaced it with user “” to force a null user-name in the PAP authentication. I also removed userpeerdns as it appears that the Blackberry was refusing to give it to me. The final piece was that I was hitting what I assumed to be a race condition, as the Blackberry did not have an IP address to give me yet, it kept sending ConfNak to me until it finished setting up the tunnel to T-Mobile on my behalf… (see inset)
Tunnel List
mernisse@mernisse-laptop:/etc/ppp/peers$ pppd call gprs
Press CTRL-C to close the connection at any stage!
defining PDP context...
OK
OK
waiting for connect...
CONNECT
Connected.
If the following ppp negotiations fail,
try restarting the phone.
Script /etc/chatscripts/gprs-connect-chat finished (pid 15068), status = 0x0
Serial connection established.
using channel 12
Using interface ppp0
Connect: ppp0 < --> /dev/rfcomm0
sent LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x448e9c82>
rcvd LCP ConfReq id=0x0 <asyncmap 0x0> <auth pap>
sent LCP ConfAck id=0x0 <asyncmap 0x0> <auth pap>
rcvd LCP ConfRej id=0x1 <magic 0x448e9c82>
sent LCP ConfReq id=0x2 <asyncmap 0x0>
rcvd LCP ConfAck id=0x2 </asyncmap><asyncmap 0x0>
sent PAP AuthReq id=0x1 user="" password=<hidden>
rcvd PAP AuthAck id=0x1
PAP authentication succeeded
sent IPCP ConfReq id=0x1 <addr 0.0.0.0>
rcvd IPCP ConfReq id=0x1 </addr><addr 169.254.1.1>
sent IPCP ConfAck id=0x1 </addr><addr 169.254.1.1>
rcvd IPCP ConfNak id=0x1
sent IPCP ConfReq id=0x2 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x2
sent IPCP ConfReq id=0x3 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x3
sent IPCP ConfReq id=0x4 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x4
sent IPCP ConfReq id=0x5 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x5
sent IPCP ConfReq id=0x6 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x6
sent IPCP ConfReq id=0x7 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x7
sent IPCP ConfReq id=0x8 </addr><addr 0.0.0.0>
rcvd IPCP ConfNak id=0x8 </addr><addr 14.34.55.230>
sent IPCP ConfReq id=0x9 </addr><addr 14.34.55.230>
rcvd IPCP ConfAck id=0x9 </addr><addr 14.34.55.230>
replacing old default route to wlan0 192.168.196.1
Cannot determine ethernet address for proxy ARP
local IP address 14.34.55.230
remote IP address 169.254.1.1
Script /etc/ppp/ip-up started (pid 15070)
Script /etc/ppp/ip-up finished (pid 15070), status = 0x0
^CTerminating on signal 2
Connect time 4.7 minutes.
Sent 300422 bytes, received 1437245 bytes.
restoring old default route to wlan0 192.168.196.1
Script /etc/ppp/ip-down started (pid 15112)
sent LCP TermReq id=0x3 "User request"
rcvd LCP TermAck id=0x3
Connection terminated.
Sending break to the modem
PDP context detached
Script /etc/chatscripts/gprs-disconnect-chat finished (pid 15117), status = 0x0
Serial link disconnected.
Script /etc/ppp/ip-down finished (pid 15112), status = 0x0
mernisse@mernisse-laptop:/etc/ppp/peers$
Looking at the phone it appears that it snuck into Modem Mode and I was able to ssh around and perform the speedtest that adorns the top of this post. I used the gprs-disconnect-chat file unmodified from the post I linked to, but modified the gprs and gprs-connect-chat files which you can get by clicking on their names or looking at http://www.ub3rgeek.net/gprs/
Modem Mode, UMA
Tags: blackberry, bluetooth, dun, linux, software, t-mobile, technology, ubuntu
I am trying use my 9700 as a modem over USB. I set it all up based on this howto: http://www.surlyjake.com/linux/ubuntu-karmic/tethered-blackberry-modem-on-ubuntu-karmic/
I am running into the following problem, which it seems happened to you too:
//////////////////////////////////////////
…
Sent 1139 bytes, received 500 bytes.
sent IPCP TermReq id=0x6b “Could not determine local IP address”
rcvd IPCP TermAck id=0x6b
sent LCP TermReq id=0×2 “No network protocols running”
rcvd LCP TermAck id=0×2
Connection terminated.
/////////////////////////////////////////
My peers file was already at user”", and I tried commenting out the userpeerdns, but it didn’t seem to help.
I tried adding the line:
ipcp-max-configure 20
to the peers file, but still encountered the problem. My question for you is a) is that where I would set ipcp-max-configure and b) are there any other tweaks you would reccomend?
I admit to not understanding a lot of your post, but since I’m not worried about bluetooth I kind of assume that I’m focusing on the relevant details. If that is not a good assumtion, please correct me.
Thanks!
I had the same problem with the “Could not determine local IP address” as well, for whatever reason it seems that the BlackBerry doesn’t autoconfigure the local side of the PPP tunnel, which strictly speaking isn’t a big problem. If you look at the bottom of the post there is a link to my config file, you may want to peek at that. I had found a few examples out on the Internet that had various configuration options in them that caused pppd to try to configure the local side of the tunnel which I think is what resulted in the problem you’re having. I would have to see your config file to suggest any other options, which you can e-mail me if you like, my e-mail is over on http://www.ub3rgeek.net/ in the top right.